features rohs compliant* surface mount smc package standoff voltage: 5.0 to 170 volts power dissipation: 1500 watts applications iec 61000-4-2 esd (min. level 4) iec 61000-4-4 eft iec 61000-4-5 surge electrical characteristics (@ t a = 25 c unless otherwise noted) smcj transient voltage suppressor diode series *rohs directive 2002/95/ec jan 27 2003 including annex. speci cations are subject to change without notice. customers should verify actual device performance in their speci c applications. parameter symbol value unit minimum peak pulse power dissipation (t p = 1 ms) (note 1,2) p pk 1500 watts peak forward surge current 8.3 ms single half sine wave superimposed on rated load (jedec method) (note 3) i fsm 200 amps steady state power dissipation @ tl = 75 c p m(av) 5.0 watts maximum instantaneous forward voltage @ i pp = 100 a (for unidirectional units only) v f (note 5) volts operating temperature range t j -55 to +150 c storage temperature range t stg -55 to +175 c 1. non-repetitive current pulse, per pulse waveform graph and derated above t a = 25 c per pulse derating curve. 2. thermal resistance junction to lead. 3. 8.3 ms single half-sine wave duty cycle = 4 pulses maximum per minute (unidirectional units only). 4. single phase, half wave, 60 hz, resistive or inductive load. for capacitive load, derate current by 20 %. 5. v f = 3.5 v on smcj5.0a through smcj90a and v f = 5.0 v on smcj100a through smcj170a. general information the markets of portable communications, computing and video equipment are challenging the semiconductor industry to develop increasingly smaller electronic components. bourns offers transient voltage suppressor diodes for surge and esd protection applications, in compact chip package do-214ab ( smc) size format. the transient voltage suppressor series offers a choice of working peak reverse voltage from 5 v up to 170 v and b reakdown voltage up to 200 v. typical fast response times are less than 1.0 ns for unidirectional devices and less than 5.0 ns for bidir ectional devices from 0 v to minimum breakdown voltage. bourns ? chip diodes conform to jedec standards, are easy to handle with standard pick and place equipment and the ? at con? guration minimizes roll away. how to order smcj 5.0 ca package smcj = smc/do-214ab working peak reverse voltage 5.0 = 5.0 v rwm (volts) suf? x a = 5 % tolerance unidirectional device ca = 5 % tolerance bidirectional device *rohs compliant asia-paci? c: tel: +886-2 2562-4117 fax: +886-2 2562-4116 europe: tel: +41-41 768 5555 fax: +41-41 768 5510 the americas: tel: +1-951 781-5500 fax: +1-951 781-5700 www.bourns.com
speci cations are subject to change without notice. customers should verify actual device performance in their speci c applications. smcj transient voltage suppressor diode series electrical characteristics (@ t a = 25 c unless otherwise noted) notes: 1. suf x ??denotes a 5 % tolerance unidirectional device. 3. for bidirectional devices with a v r of 10 volts or less, the i r limit is double. 2. suf x ?a?denotes a 5 % tolerance bidirectional device. 4. for unidirectional devices with a v f max. of 3.5 v at an i f of 35 a, 0.5 sine wave of 8.3 ms pulse width. unidirectional device bidirectional device breakdown voltage v br (volts) working peak reverse voltage maximum reverse leakage @ v rwm maximum reverse voltage @ i rsm maximum reverse surge current part number part marking part number part marking min. max. @ i t (ma) v rwm (volts) i r ( a) v rsm (volts) i rsm (amps) smcj5.0a gde smcj5.0ca bde 6.4 7.23 10 5 1000 9.2 163 smcj6.0a gdg smcj6.0ca bdg 6.67 7.67 10 6 1000 10.3 145.6 smcj6.5a gdk smcj6.5ca bdk 7.22 8.3 10 6.5 500 11.2 133.9 smcj7.0a gdm smcj7.0ca bdm 7.78 8.95 10 7 200 12 125 smcj7.5a gdp smcj7.5ca bdp 8.33 9.58 1 7.5 100 12.9 116.3 smcj8.0a gdr smcj8.0ca bdr 8.89 10.2 1 8 50 13.6 110.3 smcj8.5a gdt smcj8.5ca bdt 9.44 10.8 1 8.5 20 14.4 104.2 smcj9.0a gdv smcj9.0ca bdv 10 11.5 1 9 10 15.4 97.4 smcj10a gdx smcj10ca bdx 11.1 12.8 1 10 5 17 88.2 smcj11a gdz smcj11ca bdz 12.2 14.4 1 11 5 18.2 82.4 smcj12a gee smcj12ca bee 13.3 15.3 1 12 5 19.9 75.3 smcj13a geg smcj13ca beg 14.4 16.5 1 13 5 21.5 69.7 smcj14a gek smcj14ca bek 15.6 17.9 1 14 5 23.2 64.7 smcj15a gem smcj15ca bem 16.7 19.2 1 15 5 24.4 61.5 smcj16a gep smcj16ca bep 17.8 20.5 1 16 5 26 57.7 smcj17a ger smcj17ca ber 18.9 21.7 1 17 5 27.6 53.3 smcj18a get smcj18ca bet 20 23.3 1 18 5 29.2 51.4 smcj20a gev smcj20ca bev 22.2 25.5 1 20 5 32.4 46.3 smcj22a gex smcj22ca bex 24.4 28 1 22 5 35.5 42.2 smcj24a gez smcj24ca bez 26.7 30.7 1 24 5 38.9 38.6 smcj26a gfe smcj26ca bfe 28.9 32.2 1 26 5 42.1 35.6 smcj28a gfg smcj28ca bfg 31.1 35.8 1 28 5 45.4 33 smcj30a gfk smcj30ca bfk 33.3 38.3 1 30 5 48.4 31 smcj33a gfm smcj33ca bfm 36.7 42.2 1 33 5 53.3 28.1 smcj36a gfp smcj36ca bfp 40 46 1 36 5 58.1 25.8 smcj40a gfr smcj40ca bfr 44.4 51.1 1 40 5 64.5 23.3 smcj43a gft smcj43ca bft 47.8 54.9 1 43 5 69.4 21.6 smcj45a gfv smcj45ca bfv 50 57.5 1 45 5 72.7 20.6 smcj48a gfx smcj48ca bfx 53.3 61.3 1 48 5 77.4 19.4 smcj51a gfz smcj51ca bfz 56.7 65.2 1 51 5 82.4 18.2 smcj54a gge smcj54ca bge 60 69 1 54 5 87.1 17.2 smcj58a ggg smcj58ca bgg 64.4 74.6 1 58 5 93.6 16 smcj60a ggk smcj60ca bgk 66.7 76.7 1 60 5 96.8 15.5 smcj64a ggm smcj64ca bgm 71.1 81.8 1 64 5 103 14.6 smcj70a ggp smcj70ca bgp 77.8 89.5 1 70 5 113 13.3 smcj75a ggr smcj75ca bgr 83.3 95.8 1 75 5 121 12.4 smcj78a ggt smcj78ca bgt 86.7 99.7 1 78 5 126 11.4 smcj85a ggv smcj85ca bgv 94.4 108.2 1 85 5 137 10.4 smcj90a ggx smcj90ca bgx 100 115.5 1 90 5 146 10.3 smcj100a ggz smcj100ca bgz 111 128 1 100 5 162 9.3 smcj110a ghe smcj110ca bhe 122 140 1 110 5 177 8.4 smcj120a ghg smcj120ca bhg 133 153 1 120 5 193 7.9 smcj130a ghk smcj130ca bhk 144 165 1 130 5 209 7.2 smcj150a ghm smcj150ca bhm 167 192 1 150 5 243 6.2 smcj160a ghp smcj160ca bhp 178 205 1 160 5 259 5.8 smcj170a ghr smcj170ca bhr 189 217.5 1 170 5 275 5.5
product dimensions speci cations are subject to change without notice. customers should verify actual device performance in their speci c applications. smcj transient voltage suppressor diode series recommended footprint physical speci cations case ..........................................molded plastic per ul class 94v-0 polarity ..................... cathode band indicates unidirectional device no cathode band indicates bidirectional device weight ....................................................0.007 ounces / 0.21 grams dimensions: mm (inches) b g f d c h e a a c b dimension smc (do-214ab) a 6.60 - 7.11 (0.260 - 0.280) b 5.59 - 6.22 (0.220 - 0.245) c 2.92 - 3.18 (0.115 - 0.125) d 0.15 - 0.31 (0.006 - 0.112) e 7.75 - 8.13 (0.305 - 0.320) f 0.05 - 0.20 (0.002 - 0.008) g 2.01 - 2.62 (0.080 - 0.103) h 0.76 - 1.52 (0.030 - 0.060) dimensions: mm (inches) dimension smc (do-214ab) a (max.) 4.69 (0.185) b (min.) 3.07 (0.121) c (min.) 1.52 (0.060)
speci cations are subject to change without notice. customers should verify actual device performance in their speci c applications. smcj transient voltage suppressor diode series rating & characteristic curves pulse derating curve maximum non-repetitive surge current pulse waveform typical junction capacitance pulse rating curve steady state power derating curve 100 75 50 25 0 050 25 75 100 150 125 175 200 ambient temperature ( peak pulse derating in percent of peak power or current ?) 10 x 1000 waveform as defined by r.e.a. peak forward surge current (amps) 100 200 10 1 2 5 10 20 50 100 number of cycles at 60 hz pulse width 8.3 ms single half sine-wave (jedec method) 100 50 0 0 1.0 2.0 3.0 4.0 t, time (ms) i p , peak pulse current (%) ta=25 ? tp tr=10 ? half value= irsm 2 peak value (irsm) pulse width (tp) is defined as that point where the peak current decays to 50 % of ipsm. 10 x 1000 waveform as defined by r.e.a. capacitance (pf) 10000 100 0 0 10 100 1000 standoff voltage (volts) 1000 bidirectional ta = 25 ? unidirectional 5.0 3.0 4.0 2.0 1.0 0.0 050 25 75 100 150 125 175 200 tl, lead temperature (?) rm(av) steady state power dissipation (w) 60 hz resistive or inductive load 100 10 1.0 0.1 0.1 ? 1.0 ? 10 ? 10 ms tp, pulse width p p , peak power (kw) 100 ? 1.0 ms 5.0 mm lead areas ta = 25 ? non-repetitive pulse waveform shown in pulse waveform graph
cddfn5-0504n - tvs/steering diode array packaging information ....... ....... ....... ....... ....... ....... ....... ....... pa f e t 120 d 2 d d 1 w 1 c index hole p 0 p 1 w b 10 pitches (min.) direction of feed 10 pitches (min.) end trailer device leader start d the product will be dispensed in tape and reel format (see diagram below). devices are packed in accordance with eia standard rs-481-a and speci cations shown here. dimensions: mm (inches) item symbol smc (do-214ab) carrier width a 7.22 ?0.10 (0.284 - 0.004) carrier length b 8.11 ?0.10 (0.319 ?0.004) carrier depth c 2.36 ?0.10 (0.093 ?0.004) sprocket hole d 1.55 ?0.05 (0.061 ?0.002) reel outside diameter d 330 (12.992) reel inner diameter d 1 50.0 (1.969) min. feed hole diameter d 2 13.0 ?0.20 (0.512 ?0.008) sprocket hole position e 1.75 ?0.10 (0.069 ?0.004) punch hole position f 7.50 ?0.05 (0.295 ?0.002) punch hole pitch p 4.00 ?0.10 (0.157 ?0.004) sprocket hole pitch p 0 4.00 ?0.10 (0.157 ?0.004) embossment center p 1 2.00 ?0.05 (0.079 ?0.002) overall tape thickness t 0.30 ?0.10 (0.012 ?0.004) tape width w 16.00 ?0.20 (0.630 ?0.008) reel width w 1 22.4 (0.882) max. quantity per reel -- 3,000 rev. 04/11 speci? cations are subject to change without notice. customers should verify actual device performance in their speci? c applications. smcj transient voltage suppressor diode series
|
